Film Aquatherm Drysuit

Product details

Aquatherm® full dry suit with seals at the neck and wrist and a dry entry back zip.

Protect your Actor or Crew with this one-piece dry suit, keeps water and chills at bay and can be made to include heavy to nill base-layers (Transpire Single, Double layer or even Woolly Bear suit) depending on your environment requirements via the Protocol form.

Custom made from your measurement submission in 1-2 (working) days

Inner Surface: Soft feel, Fast Drying, Polyester Stretch Knit, non-allergenic. Fully taped and waterproofed external seams for maximum strength. Can be worn on its own, or for extra warmth as a thermal booster layer. Best worn close fitting around the neck, arm and waist and loosely comfortable around the upper body. Deep arm gussets for maximum movement. Lightweight and machine washable.

Available in Natural or Black
Can be airbrushed for extra detail

Aquatherm® fabric has been developed to enable wearers to remain warm and dry in a whole range of conditions. It is a lightweight fabric that offers great freedom of movement, far more so than with traditional, bulkier neoprene and woven garments.

It is essential that the garment is working with the wearer, unlike earlier neoprene fabrics, where the wearer is more often working against the garment. Aquatherm is less than a millimetre thick and remains stable, flexible, strong and waterproof when fully flexed. Unlike neoprene, it has the added advantage of being water-shedding and fast drying, so less temperature is lost from the wet outer shell through evaporation.

Measurements will be needed along with a film protocol form please.

These can be emailed to us using the contact form or sending them to orders@chillcheater.com.

After Care

For Aquatherm® and Aquatherm Fleece®

Recommend hand washing with warm soapy water.

Turn garment inside out. Short, warm, delicate wash, max 40 degrees in mild soapy water, (not detergent). Rinse thoroughly and air dry. Do not spin. Do not wring.

Hang garments from their cuffs and neck to ensure that if there should be any water left then it can drain away easily.

Store clean and dry indoors away from heat and direct sunlight

Do not tumble dry. Do not iron. Do not bleach. Do not dry over hot radiators or near excessive heat.

After Care

Aquatherm® and Aquatherm Fleece®

Recommend hand washing with warm soapy water.

Turn garment inside out. Short, warm, delicate wash, max 40 degrees in mild soapy water. Rinse thoroughly and air dry. Do not spin. Do not wring.

Hang garments from their cuffs and neck to ensure that if there should be any water left then it can drain away easily.

Store clean and dry indoors away from heat and direct sunlight

Do not tumble dry. Do not iron. Do not bleach. Do not dry over hot radiators or near excessive heat

Care information

How do I wash and care for my Aquatherm® and Aquatherm Fleece® garments?

For Aquatherm®, Super-stretch Aquatherm® and Aquatherm Fleece®:

• Turn the garment inside out.
• Use a short, warm, delicate wash with a maximum temp 40 degrees C° in mild soapy water .
• Rinse thoroughly and air dry.
• Do not spin.
• Do not wring.
• Do not tumble dry.
• Do not iron.
• Do not bleach.
• Do not dry over hot radiators or near excessive heat.
• Hang garments from their cuffs and neck to ensure that if there should be any water ingress in the double fabric seals then it can drain easily.